NOVA Bubbler Attachment Guide
The NOVA bubbler attachment not only provides a cooling effect, but it’s also a fun addition to NOVA with a water pipe visual experience. It’s easy to connect, since it uses the same magnetic connection as the standard mouthpiece.
Filling the bubbler
Start by removing the magnetic adapter from the bubbler. Fill a bottle cap, or other shallow container, with distilled water. Insert/submerge the bubbler bottom into the water and then suck on the mouthpiece to pull water into the lower section of the bubbler. You only need enough water to cover the two slots located in the center percolator (i.e., center glass piece). Overfilling with water may cause water to be sucked into the mouthpiece while inhaling. Before reinstalling the magnetic adapter, thoroughly dry the bottom inside area that was inserted into the water.
Cleaning the bubbler
As with all water pipes/bongs, it doesn’t take long for the water to become really smelly. Fortunately, the NOVA bubbler attachment is easy to empty simply by removing the magnetic adapter and blowing through the mouthpiece. The water will be expelled out of the bottom. The video below reviews how to clean your bubbler attachment to keep it in good condition for tasty hits!
Additional information
The video below is the quickstart guide for NOVA, which contains a short section on filling and emptying the bubbler attachment. The bubbler section starts at 1:03 minutes into the video.
